XL-7 2WD V6-3.6L (2007)
Vacuum Brake Booster: Service and Repair
Power Vacuum Brake Booster Replacement
Removal Procedure
1. Remove the underhood electrical center bracket.
2. Disconnect the coolant surge hose from the surge tank and position aside.
3. Remove the master cylinder mounting nuts. Do not disconnect the brake pipes from the master cylinder.
4. Carefully pull the master cylinder away from the vacuum booster and position aside.
5. Disconnect the vacuum booster check valve and hose assembly from the booster.
6. Remove the brake pressure modulator valve assembly.