XL-7 2WD V6-3.6L (2007)
CAUTION:
Prior to center punching and drilling out rivets, support the fan motor and shroud by placing a block of wood or other solid object under
the fan motor. Failure to support the fan motor while drilling may result in a cracked fan shroud.
CAUTION:
Failure to tape off all of the entry points to the cooling fan motor(s) will allow debris to enter and damage the motor(s).
NOTE:
When reusing the fan motor(s) tape off the front and rear entry points of the fan motor(s) before drilling the rivets. Support the fan motor(s) and
shroud prior to center punching the rivets.
4. Center punch each of the rivets (1) from the rear of the motor.
5. Drill the head of the rivets (1) from the fan motor using a 6.35 mm (0.25 in) drill bit.