XL-7 2WD V6-3.6L (2007)
Special Tool
^
EN-48313 Timing Chain Retention Tool
^
EN 46111 Crankshaft Rotation Socket
Removal Procedure
1. Remove the lower intake manifold.
2. Remove the camshaft cover.
3. Remove the camshaft sensors.
4. Remove the intake camshaft position actuator solenoid.
5. Remove the crankshaft balancer.
6. Rotate the crankshaft with the EN 46111 until the camshafts are in a neutral (low tension) position. The camshaft flats will be parallel with the
camshaft cover rail (1).