XL-7 2WD V6-3.6L (2007)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Special Tools
^
EN 46106 Flywheel Holding Tool
^
J 38416-2 Crankshaft Button
^
J 41816 Crankshaft Balancer Remover
^
J 45059 Angle Meter
Removal Procedure
1. Install the engine support fixture.
2. Remove the engine mount strut bracket.
3. Remove the engine mount.
4. Remove the starter.
5. Install the EN 46106 through the starter mounting hole.