XL-7 2WD V6-3.6L (2007)
Valve Spring: Service and Repair
Valve Stem Oil Seal and Valve Spring Replacement Left Side
Valve Stem Oil Seal and Valve Spring Replacement Left Side
Special Tool
EN 46106 Flywheel Holding Tool
EN 46110 On-Vehicle Valve Spring Compressor
EN 46116 Valve Stem Seal Remover/Installer
J 39313 Spark Plug Port Adapter
Removal Procedure
1. Remove the starter motor.
NOTE: If the EN 46106 is not installed, the crankshaft may rotate. If the crankshaft rotates, disassembly and reassembly of the entire camshaft
timing system may be required.
2. Install the EN 46106 in order to prevent crankshaft rotation.
3. Remove the camshafts and rocker arms.
4. Remove the spark plug from the applicable cylinder.
5. Install the J 39313 to the applicable cylinder.
6. Connect the J 39313 to a compressed air source.
