XL-7 2WD V6-3.6L (2007)
CAUTION:
Refer to [Fastener Notice].
1. Position engine mount in place and install engine mount bracket to engine mount bolt.
Tightening torque
Tighten the bolt to 50 Nm (37 lb ft).
2. Install the engine mount to frame bolts (1).
Tightening torque
Tighten the engine mount bolts to 50 Nm (37 lb ft).
3. Lower the vehicle.
4. Remove the engine support.
5. Install the air cleaner assembly.
Engine Mount Replacement - Right Side
Engine Mount Replacement - Right Side
Removal Procedure
