XL-7 2WD V6-3.6L (2007)
6. Install the upper engine mount bracket bolts (1).
Tightening torque
Tighten the upper engine mount bracket bolts to 50 Nm (37 lb ft).
7. Tighten the right upper engine mount bracket bolt (2).
Tightening torque
Tighten the right upper engine mount bracket bolt to 110 Nm (81 lb ft).
8. Lower the vehicle.
9. Remove the engine support.
10. Install the drive belt. .
11. Install the air cleaner assembly.
Engine Mount Bracket Replacement - Right Side
Engine Mount Bracket Replacement - Right Side
Removal Procedure