XL-7 2WD V6-3.6L (2007)
5. Tighten the right upper engine mount bracket bolt (2).
Tightening torque Tighten the right upper engine mount bracket bolt to 50 Nm (37 lb ft).
6. Install the upper engine mount bracket bolts (1).
Tightening torque Tighten the upper engine mount bracket bolts to 110 Nm (81 lb ft).
7. Lower the vehicle.
8. Remove the engine support.
9. Install the air cleaner assembly.
Engine Mount Strut Replacement - Right Side
Engine Mount Strut Replacement - Right Side
Removal Procedure
