XL-7 2WD V6-3.6L (2007)
Oil Pan: Removal and Replacement
Oil Pan Replacement
Special Tool
EN 46109 Guide Pin Set
Removal Procedure
1. Disconnect the battery negative cable.
2. Install the engine support fixture.
3. Remove the right side engine mount.
4. Raise and support the vehicle.
5. Drain the engine oil and remove the oil filter.
6. Remove the catalytic converter.
7. Remove the air conditioning (A/C) compressor.
8. Remove the oil pan bolts.
9. Remove the oil pan.
10. Clean the oil pan and the engine block gasket surface.
Installation Procedure