suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

ABOUT US
Valve Stem Oil Seal and Valve Spring Replacement - Left Side|Page 4198 > < Valve Stem Oil Seal and Valve Spring Replacement - Left Side

XL-7 2WD V6-3.6L (2007)

Page 2
background image

2. Install the EN 46106 in order to prevent crankshaft rotation. 
3. Remove the camshafts and rocker arms. 
4. Remove the spark plug from the applicable cylinder. 
5. Install the J 39313 to the applicable cylinder. 
6. Connect the J 39313 to a compressed air source.

7. Install the EN 46110 above the applicable cylinder as shown. 
8. Tighten the EN 46110 valve spring compressor nut (2).

Valve Stem Oil Seal and Valve Spring Replacement - Left Side|Page 4198 > < Valve Stem Oil Seal and Valve Spring Replacement - Left Side