XL-7 2WD V6-3.6L (2007)
CAUTION:
Refer to [Fastener Notice].
1. Position the rear exhaust manifold heat shield to the engine and install the bolts.
Tightening torque
Tighten the bolts to 50 Nm (37 lb ft).
2. Lower the vehicle.
CAUTION:
Refer to [Fastener Notice].
1. Position the rear exhaust manifold heat shield to the engine and install the bolts.
Tightening torque
Tighten the bolts to 50 Nm (37 lb ft).
2. Lower the vehicle.