XL-7 2WD V6-3.6L (2007)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement
Air Temperature Actuator Replacement
Removal Procedure
1. Remove the instrument panel (I/P) compartment. Refer to [Instrument Panel Compartment Replacement].
2. Disconnect the electrical connector from the air temperature actuator.
3. Remove the air temperature actuator screws from the HVAC module.
4. Remove the air temperature actuator from the HVAC module.
Installation Procedure
1. Align the air temperature actuator with the door shaft and rotate into position.
CAUTION: Refer to [Fastener Notice].
2. Install the air temperature actuator screws to the HVAC module.