XL-7 2WD V6-3.6L (2007)
1. Install a NEW heater inlet pipe housing seal.
CAUTION:
Refer to [Fastener Notice].
2. Install the heater inlet pipe housing bolts (1).
Tightening torque
Tighten the heater inlet housing bolts to 10 Nm (89 lb in).
1. Install a NEW heater inlet pipe housing seal.
CAUTION:
Refer to [Fastener Notice].
2. Install the heater inlet pipe housing bolts (1).
Tightening torque
Tighten the heater inlet housing bolts to 10 Nm (89 lb in).