XL-7 2WD V6-3.6L (2007)
NOTE: Lubricate the new O-ring prior to installation on the compressor hose.
1. Lightly coat the new O-ring with mineral base 525 viscosity refrigerant oil.
2. Install the new O-ring to the pressure relief valve. Refer to [O-Ring Replacement].
CAUTION: Refer to [Fastener Notice].
3. Install the pressure relief valve to the compressor.
Tightening torque
Tighten the pressure relief valve to 9.8 N.m (87 lb.in).
4. Lower the vehicle. Refer to [Lifting and Jacking the Vehicle].
5. Recharge the A/C system. Refer to [Refrigerant Recovery and Recharging].
6. Test the affected A/C joint for leaks using J 39400-A.