XL-7 2WD V6-3.6L (2007)
Removal Procedure
1. Remove the seal washer from the A/C refrigerant component.
NOTE: Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
2. Inspect the seal washer for signs of damage to help determine the root cause of the failure.
3. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
NOTE: DO NOT reuse sealing washer.
4. Discard the sealing washer.
Installation Procedure
NOTE: Flat washer type seals do not require lubrication.
1. Inspect the new seal washer for any signs of cracks, cuts, or damage.
Do not use a damaged seal washer.