suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Blower Case Assembly Replacement|Page 14630 > < Blower Case Assembly Replacement|Page 14628
Page 3
background image

14. Plug the heater core and the evaporator core with clean towels to prevent spillage when the HVAC module is removed.
15. Remove the HVAC module seal nuts from the front of dash.
16. Remove the instrument panel (I/P) retainer. Refer to [Instrument Panel Retainer Replacement].

17. Remove the shift control bracket. Refer to [Shift Control Replacement] for the AF33-5 transaxle.

18. Remove the center floor air outlet duct by sliding the duct forward then up at the rear.
19. Remove the center I/P air outlet duct retainers from the instrument panel tie bar.
20. Remove the center I/P air outlet duct from the instrument panel tie bar.
21. Remove the instrument panel tie bar. Refer to [Instrument Panel Tie Bar Replacement].
22. Disconnect the blower motor electrical connector from the I/P wire harness.
23. Disconnect the blower motor control module electrical connector from the I/P wire harness.

Blower Case Assembly Replacement|Page 14630 > < Blower Case Assembly Replacement|Page 14628