XL-7 2WD V6-3.6L (2007)
Drive Belt: Service and Repair
Drive Belt Replacement
Removal Procedure
1. Remove the air cleaner assembly.
2. Install the engine support fixture.
3. Remove the engine mount strut bracket.
4. Raise and support the vehicle.
5. Remove the engine splash shield.
6. Remove the right side engine mount bracket.
7. Lower the vehicle.
8. Rotate the drive belt tensioner clockwise to release the drive belt tension.
9. Slide the drive belt off of the belt idler pulley (1).
10. Slowly release the drive belt tensioner.
11. Remove the drive belt from the accessory drive pulleys.
Installation Procedure