XL-7 2WD V6-3.6L (2007)
3. Remove the evaporator outlet hose from the compressor hose.
4. Remove the evaporator outlet hose and liquid line retainer plate nut from the thermal expansion valve (TXV).
5. Remove the evaporator outlet hose and liquid line from the TXV.
6. Remove evaporator outlet hose from the vehicle.
7. Remove and discard the sealing washers from the evaporator outlet hose and the compressor hose. Refer to Sealing Washer Replacement].
8. Install protective caps to the TXV, the liquid line, and the compressor hose to prevent contamination and desiccant saturation.