XL-7 2WD V6-3.6L (2007)
Some run flat tires may require more than 275 kPa (40 psi) to seat the bead. In such a case, a tire safety cage must be used. Consult the tire
manufacturer for its individual repair policy.
Final Inspection
1. After remounting and inflating the tire, check both beads, the repair and the valve with a water and soap solution in order to detect leaks.
2. If the tire continues to lose air, the tire must be demounted and reinspected.
3. Balance the tire and wheel assembly.
For additional tire puncture repair information, contact:
Rubber Manufacturers Association (RMA)
1400 K Street, N.W., Suite 900
Washington
DC
20005-2403
Telephone: 202-682-4800
E-mail: info@rma.org
Website: www.rma.org
