XL-7 2WD V6-3.6L (2007)
^
T (4) series coated weights are approved for use on both steel and aluminum wheels.
NOTE: Use a nylon or plastic-tipped hammer when installing coated clip-on wheel balance weights to minimize the possibility of damage to the
polyester coating.
The contour and style of the wheel rim flange will determine which type of clip-on wheel weight (1) should be used. The weight should follow the
contour of the rim flange. The weight clip should firmly grip the rim flange.
Wheel Weight Placement - Clip-on Weights
When static balancing, locate the wheel balance weights on the inboard flange (2) if only 28 g (1 oz) or less is called for. If more than 28 g (1 oz) is
called for, split the weights as equally as possible between the inboard (2) and outboard (1) flanges.
When dynamic balancing, locate the wheel balance weights on the inboard (2) and outboard (1) rim flanges at the positions specified by the wheel
balancer.
Adhesive Weights
