suzuki Workshop Repair Guides

Suzuki Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Power Distribution Relay: Service and Repair
Relay Replacement (Attached to Wire Harness)

Relay Replacement (Attached to Wire Harness)

Removal Procedure

1. Locate the relay. Refer to the Master Electrical Component List to locate the relay in the vehicle.
2. Remove any fasteners which hold the relay in place.
3. Remove any connector position assurance (CPA) devices or secondary locks.

NOTE:  Use care when removing a relay in a wiring harness when the relay is secured by fasteners or tape.

4. Separate the relay (1) from the wire harness connector (2).

Power and Ground Distribution > Relays and Modules - Power and Ground Distribution > Power Distribution Relay > Component Information > Service and Repair > Relay Replacement (Attached to Wire Harness)

< PREV PAGE NEXT PAGE >