XL-7 2WD V6-3.6L (2007)
Installation Procedure
1. Install the MAF/IAT sensor seal to the MAF/IAT sensor.
2. Install the MAF/IAT sensor to the air cleaner assembly.
CAUTION: Refer to Fastener Notice.
3. Install the MAF/IAT sensor screws.
Tightening torque
Tighten the screws to 4 N.m (35 lb.in).
4. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
5. Install the air cleaner outlet duct.
