XL-7 2WD V6-3.6L (2007)
NOTE:
Ensure that the camshaft timing chain and the camshaft position actuators are marked for proper assembly.
6. Use a paint stick to create an alignment mark (17) on one of the timing chain links and the adjacent tooth on the exhaust camshaft position actuator
(18).
7. Use a paint stick to create an alignment mark (16) on one of the timing chain links and the adjacent tooth on the intake camshaft position actuator
(15).
CAUTION:
Refer to [Torque Reaction Against Timing Drive Chain Notice].
8. Use an open end wrench on the hex cast into the left intake and exhaust camshafts and rotate the camshafts toward each other in order to create
slack in the chain between the actuators.
