XL-7 2WD V6-3.6L (2007)
3. Disconnect the EVAP pipe quick connect fitting (1) from the EVAP purge solenoid. Refer to Plastic Collar Connect Fiting Service.
4. Disconnect the EVAP pipe quick connect fitting (2) from the EVAP purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service.
5. Remove the EVAP purge solenoid bracket bolt (3).
6. Remove the EVAP purge solenoid.
Installation Procedure
1. Install the EVAP purge solenoid.
CAUTION: Refer to Fastener Notice.
2. Install the EVAP purge solenoid bracket bolt (3).
Tightening torque
Tighten the bolt to 10 N.m (89 in. lbs.).
