XL-7 2WD V6-3.6L (2007)
2. Install the CMP sensor bolt.
Tightening torque
Tighten the bolt to 10 N.m (89 lb.in).
3. Connect the engine wiring harness electrical connector (8) to the bank 2 intake CMP sensor.
4. Install the air cleaner assembly. Refer to [Air Cleaner Assembly Replacement].
Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake
Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake
