XL-7 2WD V6-3.6L (2007)
NOTE:
^
Ensure that the foot (1) of the EN-48313 is engaged into one of the link pockets to prevent chain slippage during tightening of the EN-48313.
^
Do not allow the body of the EN-48313 to rotate when tightening the T-handle.
14. Hand tighten the EN-48313.
CAUTION:
Refer to [Torque Reaction Against Timing Drive Chain Notice].
15. Use an open end wrench on the hex cast into the body of the EN-48313 and hand tighten the T-handle.
CAUTION:
Refer to [Torque Reaction Against Timing Drive Chain Notice].
16. Use an open end wrench on the hex cast into the right intake and exhaust camshafts and rotate the camshafts towards each other in order to create
slack in the chain between the actuators.