XL-7 2WD V6-3.6L (2007)
2. Install the CMP sensor bolt.
Tightening torque
Tighten the bolt to 10 N.m (89 lb.in).
3. Connect the engine wiring harness electrical connector (2) to the bank 1 intake CMP sensor.
4. Install the air cleaner assembly. Refer to [Air Cleaner Assembly Replacement].
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust
