XL-7 2WD V6-3.6L (2007)
Tightening torque
Tighten the bolt to 10 N.m (89 lb.in).
3. Connect the engine wiring harness electrical connector (6) to the bank 2 exhaust CMP sensor.
4. Install the air cleaner assembly. Refer to [Air Cleaner Assembly Replacement].
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake
Removal Procedure
1. Remove the air cleaner assembly. Refer to [Air Cleaner Assembly Replacement].