XL-7 2WD V6-3.6L (2007)
Fuel Tank Pressure Sensor: Service and Repair
Fuel Tank Pressure Sensor Replacement
Removal Procedure
1. Remove the fuel tank. Refer to Fuel Tank Replacement (FWD) Fuel Tank Replacement (AWD).
2. Disconnect the fuel pump module harness electrical connector from the fuel tank pressure sensor.
3. Position 2 flat-bladed screwdrivers, one on each side of the sensor, near the vacuum port.
4. Carefully use the screwdrivers to lift and release the sensor from the fuel pump module.
