XL-7 2WD V6-3.6L (2007)
8. Raise and support the vehicle. Refer to [Lifting and Jacking the Vehicle].
9. Remove the positive battery cable terminal to starter solenoid nut (6).
10. Remove the positive battery cable from the engine wiring harness clip (3).
11. Remove the positive battery cable (4) lead from the starter solenoid.
12. Cut the tape and remove the positive battery cable from the wire loom.
Installation Procedure
1. Install the positive battery cable to the wire loom and re-tape the loom.
2. Install the positive battery cable (4) lead to the starter solenoid.
3. Install the positive battery cable to the engine wiring harness clip (3).
CAUTION: Refer to [Fastener Notice].
4. Install the positive battery cable terminal to starter solenoid nut (6).