XL-7 2WD V6-3.6L (2007)
Tighten the bolts to 50 N.m (37 lb.ft).
3. Connect the engine harness electrical connector to the starter.
4. Install the starter solenoid BAT terminal nut.
Tightening torque
Tighten the bolts/nuts to 13 N.m (115 lb.in).
5. Install the front catalytic convertor. Refer to [Catalytic Converter Replacement - Left Side].
6. Lower the vehicle.
7. Connect the negative battery cable. Refer to [Battery Negative Cable Disconnection and Connection].