XL-7 2WD V6-3.6L (2007)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement
Removal Procedure
NOTE:
Do not remove the drive belt from the vehicle entirely. Only slip it off the power steering pump and set it aside in the engine compartment.
1. Remove the drive belt.
2. Remove the right side engine splash shield.
3. Place drain pans under the vehicle as needed.
4. Compress the power steering reservoir outlet hose clamp (1) and disconnect the power steering reservoir outlet hose (2) from the power steering
pump.
5. Disconnect the power steering gear inlet hose (1) from the power steering pump.