XL-7 2WD V6-3.6L (2007)
NOTE:
Hold the ball shaft secure with a TORX(R) bit, when installing the nut.
3. Install the stabilizer link to stabilizer shaft nut.
Tightening torque
Tighten the nut to 50 Nm (37 ft. lbs.).
4. Tighten the loose stabilizer shaft clamp bolts.
Tightening torque
Tighten the bolts to 70 Nm (52 ft. lbs.).
5. Install the rear tire and wheel assembly.
6. Lower the vehicle.
