XL-7 2WD V6-3.6L (2007)
5. Tighten the lower control arm to support nut and bolt.
Tightening torque
Tighten the bolt to 110 Nm (81 ft. lbs.).
6. Install the shock to the lower control arm nut and bolt.
Tightening torque
Tighten the lower shock bolt and nut to 110 Nm (81 ft. lbs.).
7. Remove the jackstand from under the vehicle.
8. Install the stabilizer shaft link.
9. Install the rear tire and wheel assembly.
10. Lower the vehicle.