XL-7 2WD V6-3.6L (2007)
CAUTION:
Refer to [Fastener Notice].
2. Install the upper shock bolt.
Tightening torque
Tighten the bolt to 110 Nm (81 ft. lbs.).
3. Install the lower shock bolt and nut.
Tightening torque
Tighten the bolt to 110 Nm (81 ft. lbs.).
4. Install the rear wheelhouse to the vehicle.
5. Install the rear tire and wheel assembly.
6. Lower the vehicle.
Shock Absorber Disposal
Shock Absorber Disposal
WARNING:
Gas charged shock absorbers contain high pressure gas. Do not remove the snap ring from inside the top of the tube. If the snap ring is
removed, the contents of the shock absorber will come out with extreme force which may result in personal injury.
WARNING:
To prevent personal injury, wear safety glasses when centerpunching and drilling the shock absorber. Use care not to puncture the shock
absorber tube with the centerpunch.