XL-7 2WD V6-3.6L (2007)
e. Start the engine.
f.
Drive the vehicle forward slightly.
g. Apply the brakes quickly and firmly.
h. Drive the vehicle backward slightly.
i.
Apply the brakes quickly and firmly.
j.
Repeat this procedure, if necessary.
Installation Procedure
WARNING:
Before installing the wheels, remove any buildup of corrosion on the wheel mounting surface and brake drum or disc mounting surface by
scraping and wire brushing. Installing wheels with poor metal-to-metal contact at the mounting surfaces can cause wheel nuts to loosen. This
can cause a wheel to come off when the vehicle is moving, causing loss of control and possibly personal injury.
NOTE:
Wheel nuts, studs, and mounting surfaces must be clean and dry.
1. Remove any corrosion or foreign material from the wheel and the hub mounting surfaces.
2. Clean the threads on the wheel studs and wheel nuts.
3. Install the tire and wheel assembly. Align the locating mark of the wheel to the hub.
4. Install the wheel nuts.
CAUTION:
A torque wrench or J 39544 must be used to ensure that wheel nuts are tightened to specification. Never use lubricants or penetrating
