XL-7 2WD V6-3.6L (2007)
Automatic Transmission Dipstick - Dipstick Tube: Service and Repair
Fluid Level Indicator Replacement
Removal Procedure
1. Clean any dirt or debris away from the transaxle fluid plug/level indicator area.
2. Remove the transaxle fluid level indicator bolt from the transaxle.
3. Remove the transaxle fluid level indicator from the transaxle.
4. Wipe away any transaxle fluid from the fluid level indicator.
Installation Procedure
1. Install the transaxle fluid level indicator onto the transaxle.
CAUTION:
Refer to Fastener Notice
2. Install the transaxle fluid level indicator bolt onto the transaxle.
Tightening torque