XL-7 2WD V6-3.6L (2007)
Seals and Gaskets: Service and Repair
Drive Axle Shaft Seal Replacement (Left)
Drive Axle Shaft Seal Replacement (Left)
Special Tool
J 44809 Output Shaft Seal Installer
J 45000 Seal Remover
Removal Procedure
1. Raise and support the vehicle.
2. Place a drain pan under the transaxle to catch any spilled transaxle fluid.
3. Remove the left front axle shaft.
4. Using the J 45000, remove the axle seal from the transaxle and discard.
5. Clean the seal bore in the transaxle housing.
Installation Procedure
1. Using the J 44809, install the left axle seal into the transaxle.