XL-7 2WD V6-3.6L (2007)
4. Install the rear transaxle mount.
5. Install both catalytic converters.
Transmission Mount Bracket Replacement - Left Side
Transmission Mount Bracket Replacement - Left Side
Removal Procedure
1. Support the transaxle with a height adjustable transmission stand.
2. Remove the left engine splash shield.
3. Remove the left transaxle mount.
4. Lower the transaxle enough to access the mount bracket bolts.
5. Remove the transaxle mount to frame bolts (1).
6. Remove the transaxle mount bracket (2).
Installation Procedure
1. Position the transaxle mount bracket (2) to the transaxle.
CAUTION:
Refer to [Fastener Notice]
2. Install the transmission mount bracket bolts (1).
Tightening torque
Tighten the nuts to 55 Nm (41 ft. lbs.).
