XL-7 2WD V6-3.6L (2007)
1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new input speed sensor O-ring.
2. Install the new input speed sensor O-ring onto the input speed sensor.
3. Install the input speed sensor to the transaxle.
CAUTION:
Refer to [Fastener Notice]
4. Install the input speed sensor bolt.
Tightening torque
Tighten the bolt to 6 Nm (53 in. lbs.).
5. Connect the electrical connector (4) to the input speed sensor.
6. Install the battery tray.
