XL-7 2WD V6-3.6L (2007)
7. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to a new transaxle fluid temperature sensor O-ring seal (32).
8. Install a new transaxle fluid temperature sensor O-ring seal (32) into the groove of the transaxle fluid temperature sensor (36).
9. Install the transaxle fluid temperature sensor (36) into the front control valve body fluid temperature sensor bore.
10. Install the transaxle fluid temperature sensor clip (49).
11. Install the fluid temperature sensor bolt (31).
Tightening torque
Tighten the bolt to 10 Nm (89 in. lbs.).
12. Connect the 8 solenoid wire connectors as follows:
^
1 blue
^
2 black
^
3 green
^
4 black
^
5 blue
^
6 gray
^
7 brown
^
8 black
13. Install the control valve body cover.
14. Perform the transmission adaptive learn procedure.
