XL-7 2WD V6-3.6L (2007)
Wheel Bearing: Service and Repair
Rear Suspension
Rear Wheel Bearing and Hub Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the rear tire and wheel assembly.
3. Remove the brake rotor.
4. Remove the wheel speed sensor.
5. If equipped with all wheel drive (AWD), remove the rear wheel driveshaft nut.
NOTE:
The splash shield and park brake assembly are supported to the knuckle between the wheel bearing mounting bolts and the wheel bearing. Care
should be taken to support these items while the wheel bearing is being replaced.
6. Remove the 4 wheel bearing bolts.