XL-7 2WD V6-3.6L (2007)
1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new output speed sensor O-ring.
2. Install the new output speed sensor O-ring onto the output speed sensor (2).
3. Install the output speed sensor into the transmission case assembly.
CAUTION:
Refer to Fastener Notice]
4. Install the output speed sensor bolt.
Tightening torque
Tighten the bolt to 6 Nm (53 in. lbs.).
5. Connect the electrical connector (2) to the output shaft speed sensor.
6. Install the battery tray.
