XL-7 2WD V6-3.6L (2007)
7. Use a small flat-blade tool to move the front TPA to the release position.
8. Use the J 38125-213 or the J 38125-560 (GM P/N 15314260) tool to release the terminals by inserting the tool into the terminal release cavity. See
the release tool cross reference in the Reference Guide of the J-38125 to ensure that the correct release tool is used.
9. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a
terminal out of a connector.
Repair Procedure
Use the appropriate terminal and follow the instructions in the J-38125.
Location of the terminal in the repair tray and the proper crimp tool can be found in the appropriate connector end view.
Molex Connectors
Molex Connectors
Special Tool
J-38125 Terminal Repair Kit
Terminal Removal Procedure
