XL-7 2WD V6-3.6L (2007)
NOTE: Use care when applying the prep, clear #1, to the window. This primer dries almost instantly, and may stain the viewing area of the
window if not applied evenly.
2. Use a new dauber in order to apply glass prep, clear #1, to the channel area approximately 13 mm (1/2 in) to the upper edge of the window.
3. Wipe the glass primed area immediately with a clean lint-free cloth.
4. Shake the glass primer, black #2, for at least 1 minute.
5. Use a new dauber in order to apply glass primer, black #2, to the top edge of the window.