XL-7 4WD V6-2.7L (2003)
^
Install RH (No.2) bank 1st timing chain intake camshaft sprocket (1) noting the following points.
^
The sprocket should be set in such way that its timing marks (4) can be seen.
^
Camshaft (2) should be held stationary by using a spanner at its hexagonal parts (3) as shown in figure.
^
Install timing chain tensioner (1) as shown in figure.
Tightening torque
Timing chain tensioner nut b: 25 Nm (2.5 kg-m, 18.0 ft. lbs.)