XL-7 4WD V6-2.7L (2003)
Suspension Spring ( Coil / Leaf ): Service and Repair
Rear Suspension
Removal
1. Hoist vehicle and remove rear wheel.
2. Support rear axle housing (1) by using floor lack (2).
3. Disconnect parking brake cable hanger (1) from chassis frame (4) and clamp (3) from cross member (2).
4. Remove shock absorber lower mounting bolt (2).
5. Remove wheel speed sensor clamps (1) from upper rod (2) and axle housing (3), if equipped with ABS. For right side, remove E-ring for fixing
brake pipe from cross member and disconnect breather hose from axle housing.
6. Lower rear axle housing gradually as far down as where coil spring (1) can be removed.