XL-7 4WD V6-3.6L (2008)
7. Install the EN-47971 onto the oil filter adapter.
8. Install the 1/8 NPT fitting from the J 21867 into the port on the EN-47971.
9. Install the J 21867 flexible hose to the EN-47971.
10. Run the engine and measure the engine oil pressure.
11. Compare the readings to [Engine Mechanical Specifications].
12. If the engine oil pressure is below specifications, inspect the engine for 1 or more of the following conditions:
^
Oil pump worn or dirty.
^
Oil pump-to-engine block bolts loose.
^
Oil pump screen loose, plugged, or damaged.
^
Oil pump screen O-ring seal missing or damaged.
^
Oil pump pressure relief valve malfunction.
^
Engine bearing clearance excessive.
^
Cracked, porous, or restricted oil galleries.
^
Oil gallery plugs missing or incorrectly installed.
^
Valve lifters broken. Repair, as necessary.
CAUTION: This engine uses a special high performance oil filter. Use of any other filter may lead to filter failure and/or severe engine