XL-7 4WD V6-3.6L (2008)
2. Install the blower motor control module screws to the HVAC module.
Tightening torque
Tighten the screws to 1.5 N.m (13 lb.in).
3. Connect the electrical connector to the blower motor control module.
2. Install the blower motor control module screws to the HVAC module.
Tightening torque
Tighten the screws to 1.5 N.m (13 lb.in).
3. Connect the electrical connector to the blower motor control module.