XL-7 4WD V6-3.6L (2008)
2. Loosen both inner tie rod jam nuts.
NOTE:
The inner tie rod must rotate freely from the boot seal surface. Do not allow the boot to rotate.
3. Loosen the inner tie rod seal to boot surface.
4. Use a wrench on the tie rod flats to increase or decrease the toe angle specifications.
CAUTION:
Refer to [Fastener Notice].
5. Tighten the inner tie rod jam nuts.
Tightening torque
Tighten the jam nuts to 60 Nm (44 ft. lbs.).
6. Inspect the toe angle to ensure proper adjustment and adjust as necessary.